|
NEW! HIP CHAIN 2.0:
The new HipChain 2.0 is designed to be simple to use and light to carry. The new, slim 5000 metre thread cone allows a slim profile
close to your body for working amongst dense forest. With a capacity of 5000 metres of thread on a cone, this special cones base
interlocks with the outer shell eliminating heavy mounting hardware. The counter's reset knob is conveniently mounted at the rear
with a wide flange allowing reset from from the top or side. Easy to re-thread, with a sturdy plastic body and metal components
only where you need them for a long service life. Metric.
| #ASHC2M: |
Hip Chain 2.0 |
$115.00 |
| #WT5000: |
Hip Chain Thread - 5000m Roll |
$5.95 |
|
|
HIP CHAIN THREAD FOR CHAIN BUDDY:
White thread. Strong yet biodegradable (disintegrates with sunlight).
Length of 2.5 km per roll. Won't fluff when you pull it through the reel.
Use with the older M25 model hip chains above - not compatible with the ASHC2M below.
| #WT1: |
Hip Chain Thread - Cardboard Core |
$3.95 |
| #WT12: |
Hip Chain Thread - Cardboard Core, Pkg/12 Rolls |
$43.00 |
| #WT1A: |
Hip Chain Thread - Plastic Core |
$3.80 |
| #WT10A: |
Hip Chain Thread - Plastic Core, Pkg/10 Rolls |
$36.00 |
|
|
PLASTIC FOLDING RULE:
- Compact size and lightweight, easy to carry.
- Chemical, water, impact and scratch resistant, durable use.
- Play-free precision joints with 90 degrees increment angle locks.
- Maintenance-free, won't rust or kink
- Clear deep embossed scales, with both metric and British unit, easy to read.
- Color: white
- Material: ABS
- Length (Open): 2m
| #66PLAS: |
Plastic Metric 2m Folding Rule |
$18.95 |
|
|
WOODEN FOLDING RULE:
Folding Rule, English/Metric Combination
6-1/2' (2M) Long with ft., ins., 16ths one side; mm, cm and dm other side
Made from specially selected fine Beechwood. Weather-resistant markings have a tough, clear protective coating.
Steel springs have a precision lock action for extra strength when extended. Cleanly machined edges allow the rule to be
snapped together easily and hold it stiff while measuring.
| #66M: |
Wooden Metric/Standard 2 metre/6 ft |
$20.95 |
|
|
FIBREGLASS FOLDING RULE:
2m Metric/English Ruler with mm one side, 8ths and inches other side
These heavy duty, waterproof rulers are designed to withstand extreme weather conditions.
Flexible and washable, the durable rulers are built to outlast traditional wood rulers. Graduations are engraved into the fiberglass to resist scratching.
| #FGRM2: |
Fiberglass 2 m folding Rule |
$27.95 |
|
|
PLASTIC MEASURING TAPE:
Reinforced plastic measuring tape. One side measures in inches (60"), the other side in centimeters (152 cm).
Width of tape: 15mm (5/8") Color and design may vary.
| #086-11812: |
Measuring Tape, Plastic |
$1.75 |
|
|
NEW! KESON® ULTRA BRIGHT BLADE MEASURING TAPES:
25' / 7.6mL x 1"W
Hi-Vis Yellow side is graduated on top edge in ft., in., 8ths and 16ths and on bottom edge in mm and cm;
White side is a vertical scale graduated in ft., in., 8ths and 16ths.
Dual-sided tapes have a 1"W nylon-coated steel blade with easy to read graduations (includes 16" Center and 19.3 inch rafter markings).
All tapes feature a high-vis orange rubber grip, a positive locking button, bumper cushion, heavy-duty end hook measuring true zero, and a belt clip.
Combination English/Metric Scales or Units.
| #39638: |
Keson Measuring Tape |
$19.25 |
|
|
NEW! LUFKIN EXECUTIVE THINILNE TAPE:
Lufkin Executive Thinline Pocket Tape, 6'/2m, Model W606ME
Convenient pocket-sized tape has a chrome case, steel yellow blade, and textured edges for easy handling.
The top edge is graduated in 16ths and numbered consecutively in inches.
The bottom edge is graduated in millimeters and numbered every 10th millimeter. 1/4"W x 6' (2m) L blade.
| #W606ME: |
Lufkin Executive Thinline Tape |
$31.00 |
|
|
DIAMETER TAPE:
Two lengths avalable:
120 cm diameter/5m linear.
320 cm diameter/10m linear.
5/8quot; (1.6 cm) Wide tape line is synthetic fabric reinforced with thin phosphor brass wires. Claw hook, handcrank rewind.
Case dimensions: 3-7/8" (6.7 cm) x 1-1/8". (2.9 cm)
| #FDT5: |
Diameter Tape, 5m |
$56.00 |
| #FDT10: |
Diameter Tape, 10m |
$65.00 |
|
|
KESON® OPEN REEL FIBERGLASS TAPE:
1/2″ wide, top-quality, non-conducting fiberglass tapes won't shrink or deteriorate.
Easy-to-read permanently bonded graduations. Folding end hook.
The cross-arm open reel has a folding rewind handle and a "stake point."
Graduated on one side: meter, cm and 2 mm divisions.
| #OTR-15M: |
15 Meter Keeson Tape |
$27.75 |
| #OTR-30M: |
30 Meter Keeson Tape |
$39.50 |
| #OTR-50M: |
50 Meter Keeson Tape |
$57.50 |
|
|
ALUMINUM METER STICK:
Aluminum, metric and standard. Graduated in 8ths to the inch
on one edge with millimetres on the other edge. Back side of the stick provides
metric conversion tables. Convenient hang hole at one end.
| #MTAL: |
Meter Stick, Aluminum |
$14.50 |
|
|
PLASTIC METER STICK:
Tough polystyrene plastic, white. Will not warp or change shape with
ordinary use. Graduated in mm on one side and 0.5 cm on the other side.
Graduations are on both edges. 8 x 25 mm x 1 m.
| #44680: |
Meter Stick, White Plastic |
$16.75 |
|
|
STAINLESS STEEL RULER:
30 cm (12″ long) x 3.2 cm (1.25″) wide. Graduated in sixteenths of
an inch on one edge and millimetres on the other edge. Non-skid cork backing.
| #SSRULE6: |
Stainless Steel Ruler 6″ |
$4.20 |
| #SSRULE12: |
Stainless Steel Ruler 12″ |
$5.95 |
|
SILVA® MAP MEASURER
Direct reading graduations in miles for 1:24,000, 1:62,500, and 1:250,000 USGS maps. Kilometer
scales include: 1:25,000, 1:50,000, and 1:100,000. Also includes inch and centimeter graduations
for maps of unknown scale. Additional features include: revolution counter, reset wheel, folding
magnifier, and padded vinyl storage pouch.
| #45267: |
Map Measurer |
$38.00 |
|
|
PLASTIC TREE CALIPER:
Use this durable caliper to measure the size of a tree up to 7" diameter! Fits easily into your pocket.
The English scale reads from 0 to 7 inches with 1/4" graduations.
The metric scale reads from 0 to 15 cm with 1 cm graduations.
| #PTC7: |
Plastic Tree Caliper |
$8.25 |
|
|
ALUMINUM TREE CALIPER:
Easy to use, this aluminum caliper is not affected by weather or climate.
Measures diameters up to 8" in inches on one side (0 to 8" marked every 1/2")
and centimeters on the other side (0 to 20 cm). 9-1/2" Long.
| #ATC8: |
Aluminum Tree Caliper |
$45.25 |
|
|
METAL CALIPERS:
- For inside and outside measurement in metric or english units.
- Ideal for learning precision measurement techniques by using the vernier principle.
- Measure to 125mm in 1mm interval and the 10 part vernier reads to 0.1mm.
- English scale graduated to 5" in 1 / 16" divisions and the 8 part vernier reads to 1 / 128".
- Features a locking pin to secure reading and knurled thumbwheel permits fast, easy measurement.
- Beveled cross horns are useful for internal measurement.
- Made of plated steel and packed in vinyl case.
| #086-11876: |
Metal Calipers |
$18.95 |
|
|
PLASTIC CALIPERS:
150 mm (6″) x 0.1 mm graduations. Easier to read and use than metal calipers. Stand up to water and most chemicals.
| #CALPLA: |
Plastic Calipers |
$2.75 |
|
|
PLASTIC DIAL CALIPERS:
150 mm x 0.02 mm graduations. Comes with Plastic Case.
| #DIALCAL: |
Plastic Dial Calipers |
$21.25 |
|
|
NEW! TRACEABLE® DIGITAL CARBON-FIBER CALIPER
Make length/diameter measurements three ways: outside, inside, and depth. Results can be viewed in either inches or millimeters at
the touch of a button on the 1/3"H digital display. Able to zero at any point, the zero button allows you to instantly set the unit to zero
when jaws are at any position. This handy feature permits you to set a Floating Zero™ or reference point to read "greater than or less
than results with a minus sign displayed" without calculations. To assure accuracy, each caliper comes with an individually serial-numbered
Traceable® Certificate indicating traceability to standards provided by NIST. Made of strong composite carbon fiber.
Measuring Range: 6"/150mm.
Resolution: 0.01"/0.1mm.
Accuracy: ±0.01" or ±0.2mm.
Non-metallic/Non-conductive: Yes.
Dimensions: 9.5" x 3".
Weight: 2 oz.
| #59581: |
Digital Calipers - Carbon Fiber |
$54.35 |
|
|
NEW! TRACEABLE® DIGITAL STAINLESS STEEL CALIPER
Traceable Digital Stainless-Steel Caliper, 6"/150mm
Make length/diameter measurements three ways: outside, inside, and depth. Results can be viewed in either inches or
millimeters at the touch of a button on the 1/3"H digital display. Able to zero at any point, the zero button allows you to
instantly set the unit to zero when jaws are at any position. This handy feature permits you to set a Floating Zero™ or
reference point to read "greater than or less than results with a minus sign displayed" without calculations. To assure
accuracy, each caliper comes with an individually serial-numbered Traceable® Certificate indicating traceability to
standards provided by NIST. Made from durable, acid-resistant hardened stainless steel..
Measuring Range: 6"/150mm.
Resolution: 0.005"/0.10mm.
Accuracy: ±0.001" or ±0.03mm.
Non-metallic/Non-conductive: No.
Dimensions: 9" x 3".
Weight: 5 oz.
| #59582: |
Digital Calipers - Stainless Steel |
$152.25 |
|
|
